Garage Door Sizes

10 feet wide · 8 feet high · single

10x8 garage door

One full-size truck or SUV with a roof rack.

10'0" 8'0" 1.9' spare · 11" each side

Where it comes from

Why an opening is 10x8

The single door for a household with a real truck. Ten by eight turns up where somebody either built for a pickup or replaced a 9x7 after the third scrape, and it is common on newer builds in places where a full-size truck is the normal car.

One full-size pickup or a large SUV with something on the roof. The extra foot of height is the point: a truck with a roof rack, a light bar or a rooftop tent runs close to eight feet, and seven feet of opening is the thing that stops it.

Two arched garage doors finished in red-brown timber, side by side under white stucco arches.
Two arched openings, two separate doors. A pier between them is doing real work. — MF Garage Doors, Sebring, Florida.

Fitting one

What changes at 10x8

An eight-foot door is one section taller than a seven, which means more weight, a longer track and slightly more headroom wanted above the opening. Still inside single-door territory for spring count, but the sections are heavier to lift into place than a 9x7 and it shows on a hot afternoon.

The opener. Eight feet of travel needs a rail cut for it. Most openers ship for a seven-foot door and take an eight-foot extension — check before you buy the opener, not after.

Getting hold of one. Generally stock in steel, more often ordered in anything else.

A garage door with a row of windows across the top, seen from inside a block-walled garage under construction, with the opener mounted to the ceiling.
Block walls, bare slab, door in. The building is not finished and the door already works. — MF Garage Doors, Sebring, Florida.

The mistake

What people get wrong about a 10x8

Buying the door for the truck you have and forgetting the roof. Measure the vehicle at its tallest point, with whatever normally lives on top of it, and then leave a few inches — a door that clears by an inch clears until the tyres are properly inflated.

What it costs

A 10x8 door, installed

MaterialTypical, installedWorth knowing
Sectional steel$3,170The baseline, and most of the doors on most streets.
Insulated steel$3,920Worth it on an attached garage or one with a room above it.
Steel overlay, carriage look$6,720The swing-door look on a sectional door. Where the price starts climbing.
Wood overlay$14,570Real wood over an insulated core. Beautiful, and it needs refinishing.
Aluminium and glass$8,320Modern, lots of daylight, lower insulation value.

The gap between the cheapest and dearest 10x8 is $16,570, and not one dollar of it is the size. Same opening, same fitting, same morning — what moves the number is the model: panel style, insulation and overlay. Why a door costs what it does →

National guide ranges, checked September 2026, not a quote — what moves the number.

That is the door, the tracks, the springs, fitting it and taking the old one away. An opener, a keypad and any work on the opening itself are separate — what is in a quote and what is not.

Before you book it

What the extras cost · why nobody should touch their own springs

Exact price

Want the real number for your opening?

The range above is a guide. Tell us what you need and somebody who works your area will price it properly.

What do you need?

Tell us what you need first

Your details are used to quote this job and nothing else.

Framing

Rough opening for a 10x8

10'0" × 8'0"

For a sectional door the rough opening equals the door size exactly. A 16x7 door needs a 16'0" wide by 7'0" high finished opening.

Headroom, sideroom and backroom →

Fits

What goes through a 10x8

  • Compact car (Civic) — 3.2' spare across the mirrors
  • Sedan (Camry) — 3.0' spare across the mirrors
  • Small SUV (RAV4) — 2.9' spare across the mirrors
  • Large SUV (Suburban) — 2.5' spare across the mirrors
  • Full-size pickup (F-150) — 2.0' spare across the mirrors · tight, 12" each side — mirrors first
  • Cargo van (Transit) — 1.9' spare across the mirrors · tight, 11" each side — mirrors first

Questions

10x8 garage doors, answered

How much does a 10x8 garage door cost?

A 10x8 in sectional steel runs about $2,080 to $4,250 installed, and $2,580 to $5,250 insulated. That is the door, the tracks, the springs, fitting it and taking the old one away. An opener is separate.

What is the rough opening for a 10x8 garage door?

10 feet by 8 feet, exactly. For a sectional door the rough opening is the door size — framing it wider leaves a gap the seal cannot close.

How much clearance do you need for a 10x8?

12" of headroom above the opening for a standard torsion setup, 9" front, 4.5" rear of sideroom each side for the vertical track, and the door height plus 16 inches of backroom. The full table, including low-headroom kits, is on the rough opening guide.

What fits through a 10x8 garage door?

compact car (civic), sedan (camry), small suv (rav4), large suv (suburban), full-size pickup (f-150), cargo van (transit) — one at a time. The measurement that matters is across the mirrors, not the body.

Is an insulated 10x8 worth the extra?

About $500 to $1,000 more. Yes if the garage is attached or there is a room above it — you feel it in the summer and in the heating bill. A detached garage you only park in: skip it.

How long does it take to fit?

Three to five hours for a single door, plus an hour or two if the old one is coming out.

What opener does a 10x8 need?

Eight feet of travel needs a rail cut for it. Most openers ship for a seven-foot door and take an eight-foot extension — check before you buy the opener, not after.

Is a 10x8 a stock size?

Generally stock in steel, more often ordered in anything else.

The next size up

10x8 or 12x10?

A 12x10 is 2 feet wider and costs roughly $2,550 more in steel. Worth it if you open car doors inside the garage rather than on the driveway. See the 12x10 →

Other sizes

16x710x108x79x716x812x10

Not sure? Use the size finder →

Written by MF Garage Doors, who have been fitting and repairing garage doors out of Sebring, Florida since 2019. The photographs are of their own work.

Clearance and rough-opening figures are the manufacturers' published numbers, read through by Dmi, who has been fitting doors with us since 2019. Price bands checked against a working contractor's list, September 2026, and widened to national ranges — a guide, not a quote.

Published . Figures last checked .

Something here wrong? Tell us and it gets fixed.